2-component repair paste. Easy to use. Suitable for sealing, closing and glueing different material like metal, aluminium, plastics, concrete, wood and glass. The material also hardens in water to a metallic substance with high density and tensile strength.

Quality:

Ductile 2-component epoxy repair paste

Applicability:

Sealing of pipelines and water boilers (even submerged).

Renewal of defect threads and tube connections.

Glueing and repairing various materials in sanitary areas (tubes and pipes, flushing box etc.), as well as furniture (broken out hinges, wood connections).

Technical Characteristics:

• No loss of volume after hardening
• Resulting in a non-ageing moulding material with good chemical strength
• Compression strength 800 kg/cm2
• Tensile strength 300 kg/cm2
• Flexibility strength 56 Mpa
• Temperature resistance: 190°C

Application:

The part to be repaired must be clean and free from grease. Mix the required amount of Kit-mastic using equal parts of resin and hardener and press the paste firmly onto the defective area. Use a wooden block or similar device to carefully seal areas under pressure before applying Kit-mastic and fix it with an adhesive tape. Repairs can also be carried out below water, since the material hardens also in water. Depending on the ambient temperature, the time available for subsequent machining is between 15 and 20 minutes.

Drying times: 25°C / 2 hours, 60°C / 20 min., 100°C / 5 min.

To obtain a good surface, glue a plastic foil onto the material and remove it after drying. After hardening, Kit-mastic can be drilled, filed, ground and lacquered.