For the repair of impact damage and flaking on washbasins, kitchen sinks, shower trays and bathtubs with enamel, ceramic (porcelain) and acrylic surfaces.
No special skill is required and users need only follow the enclosed simple instructions.

Our Kitchen & Bathtub Repair Kit is necessity for every homeowner, plumber or maintenance engineer. For professional and cost-saving sink and tub repairs when ease and perfect results count.

Quality

2-component repair paste, for porcelain, enamel and acrylic or fiberglas shower, sink and bathtub repairs. Repair spray - Non yellowing! Spezial sandpaper with minimal rub off on ceramic and enamelled surfaces. Wet/dry sandpaper for acrylic and fiberglas surfaces

Sink, shower and bathtub repair. Damaged enamelled steel, cast-iron baths, porcelain sinks, ceramic, acrylic and fiberglas surfaces.

Applicability:

Sanitary colours or special colours from customers

Colours:

Standard colour card:

colours

FAQ

Application:

The area to be repaired must be clean, dry and free from oil or grease.

Mix the Filler and Hardener well, then smooth the Filler into the damaged area with the spatula.

After 30 minutes, use the sandpaper to give an even smooth finish and wipe the area clean.

Apply light coatings of enamel spray until a satisfactory finish is achieved.

Allow the repair to harden for 4 days - the job is done.

Technical Information
 sink and tub repair